深圳市元锋科技有限公司
网站导航

产品中心

当前位置:主页 > 产品中心 > 示波器附件 > 探头 >A622电流探头
A622电流探头

A622电流探头

型号:A622

产品时间:2023-11-10

简要描述:

A622电流探头与泰克示波器配合使用时自动读数和定标,因此无需将电压转换为电流或者手动设定标

推荐产品
详细介绍

A622电流探头The A600 Series current probes are specifically designed to support measurements with the TekMeter® or oscilloscope.

Features and benefits

  • A621
    • AC – 5 Hz to 50 kHz
    • 100 mA to 2000 A peak
    • For DMMs and oscilloscopes
    • Clamp on
  • A622
    • AC/DC – 100 kHz
    • 50 mA to 100 A peak
    • For DMMs and oscilloscopes

Applications

  • Motor drives
  • Inverters
  • Power supplies
  • Avionics

A621 2000 Amp AC Current probe/BNC

This industrial-style clamp-on probe has a BNC connector and can be used with a shrouded banana plug adapter 1 so it can be used on digital multimeters, TekMeter, and oscilloscopes. The A621 can measure AC currents from 100 mA to 2000 A peak over a frequency range of 5 Hz to 50 kHz. It provides a 1 mV, 10 mV, or 100 mV output for each Amp measured.

1 For instruments with banana jack inputs, Tektronix part number 012-1450-00 Female BNC to banana lead adapter is required.

A622 100 Amp AC DC Current probe/BNC

This "long nose" style clamp-on probe uses a Hall Effect current sensor to provide a voltage output to oscilloscopes. It has a BNC connector and can be used with a shrouded banana plug adapter 1 so it can also be used on digital multimeters, TekMeter, and oscilloscopes. The A622 can measure AC/DC currents from 50 mA to 100 A peak over a frequency range of DC to 100 kHz. It provides 10 mV or 100 mV output for each Amp measured.

A622电流探头Recommended products

TPS2000, TDS1000B, TDS2000C, and TDS3000C Series oscilloscopes and DMM4020 1, DMM4040 1, and DMM4050 1 digital multimeters.

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

CharacteristicA621A622
Frequency range5 Hz to 50 kHzDC to 100 kHz
Maximum input current2000 A peak100 A peak
Output1 mV/A, 10 mV/A, 100 mV/A10 mV/A, 100 mV/A
Maximum conductor diameter54 mm (2.13 in.)11.8 mm (0.46 in.)
TerminationBNC 2BNC 2
Maximum bare-wire voltage600 V (CAT III)600 V (CAT III)
SafetyUL3111-2-032, CSA1010.2.032, EN61010-2-032, IEC61010-2-032 UL3111-2-032, CSA1010.2.032, EN61010-2-032, IEC61010-2-032 

 


产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7

联系方式

邮件:yf@szyf518.com
地址:深圳市宝安区宝安大道3016号富星通大厦716

产品技术咨询微信号移动端公司官网浏览

在线客服 联系方式 二维码

服务热线

400-617-8668

扫一扫,关注我们